Many companies have troubles about how to cool the plants, because while solving the cooling of the plant, not only the effect of cooling, but also the cost of cooling need to be considered. The factory buildings in summer are very stuffy, mainly because they don’t know what cooling equipment to use to cool down. 

Firstly, we consider air conditioners, while most plants are big , and the cost of using air conditioners to cool down is too high than fan and air cooler. In addition, If use air conditioner .the space cannot be ventilated, and cannot discharge industrial waste gas and odors from the production workshop.

Install fans and exhaust fans. It cannot cool down very well, because the temperature in the workshop is too high in summer, and the wind blown by the fan is hot air, and the temperature blown to the human body is higher than that of the human body. the effect is not good.

Many steel-structured workshops use coating heat insulation or spraying to solve the problem of sultry heat, while the humidity will be very high, it has a certain impact on mechanical production and the human body, so it is not suitable for workshop production.

Like those ordinary factories, there are many companies using environmentally friendly evaporative air cooler to solve the problem of factory cooling. Because water air cooler not only has relative low cost, but also has a very good cooling effect. It consumes only 1 degree of electricity per hour, but the cooling area can reach 100 square meters, and its cooling effect is also good. Reduce temperature 5-10 degrees.

And there are also some large-scale plant choose fan and industrial air cooler cooling system. Air cooler can bring cool air , then the industrial ceiling fans to agitate the cool air sent into the plant . Then generate a three-dimensional natural breeze of 1-3 levels, which makes people feel very comfortable when blowing on the human body.